The emergence of foam carving machine has provided another rare business opportunity for the advertising decoration industry. It is gradually accepted by people as a computer engraving machine just a few years ago. The carving, carving of cards, various signs, crystal character boxes, building models and mold making have been gradually popular in this industry. With the gradual application of foam engraving machines, various kinds of foam engraving machines are gradually appearing in the market. How do users choose their own foam carving machines?

請注意以下幾點：

Please note the following:

1、要注意泡沫雕刻機的功能，泡沫雕刻機的雕刻電機有大功率和小功率之分。有些泡沫雕刻機功率較小只適合做雙色板、建筑模型、小型標牌、三維工藝品等材料的加工，這種工藝已流行一段時間，但由于雕刻功率太小而大大影響了其應用范圍。另一種是大功率雕刻頭的泡沫雕刻機，這種泡沫雕刻機有分為兩類，一類是大幅面切割機：幅面一般在一米以上，但這種泡沫雕刻機的精度一般較差；另一類是幅面適中的泡沫雕刻機：這種泡沫雕刻機一般應用于精細加工和有機標牌制作。

1, pay attention to the function of the foam engraving machine. The carving motor of the foam carving machine has high power and low power. Some of the foam engraving machines are less powerful and are only suitable for processing double color boards, building models, small signs, 3D crafts, etc. this technology has been popular for some time, but due to the small power of engraving, it has greatly affected its application. The other is the foam carving machine for high-power carving heads. There are two kinds of foam carving machines, one is the large format cutting machine: the width is generally over one meter, but the accuracy of the foam carving machine is generally poor. The other is a medium sized foam engraving machine: this foam engraving machine is commonly used for fine processing and organic label production.

2、要了解雕刻電機的性能和功能，泡沫雕刻機的雕刻頭電機也是很關鍵的，因?yàn)榈窨填^電機一般都不屬于保修范圍，而雕刻頭電機又是長時間連續工作的，所以如果雕刻頭電機不好也會影響泡沫雕刻機的使用。

2, to understand the performance and function of the carving motor, the carving motor of the foam carving machine is also very important, because the engraving motor is generally not a warranty, and the carving motor is working for a long time. So if the carving motor is not good, it will also affect the use of the foam carving machine.

3、再者就是雕刻頭電機的速度可調范圍，一般速度可調范圍是每分鐘幾千到三萬轉，若速度不可調或速度可調范圍較小，那么就說明該泡沫雕刻機應用范圍就受到很大的限制，因?yàn)榈窨滩煌牟牧媳?須用不同的雕刻頭轉速。

3, the other is the speed adjustable range of the carving motor. The adjustable speed range is from several thousand to thirty thousand turns per minute. If the speed is not adjustable or the speed adjustable range is small, the application range of the foam engraving machine will be greatly restricted, because different materials must be used with different carving speed.

4、泡沫雕刻機本體制造工藝：大功率泡沫雕刻機工作時要求本體一定要精 密和穩定，所以，長期大功率雕刻應采用鑄造本體才能保證其加工精度和穩定性。

4, foam carving machine manufacturing process: large power foam engraving machine work requires that the body must be precise and stable, therefore, long term high-power carving should use casting body to ensure its machining accuracy and stability.

5、控制器一般也分為兩類：一類控制器只是做驅動，而其所有運算工作由電腦來完成，在泡沫雕刻機工作時電腦處于等待狀態，無法進行排版工作。另一類控制器采用單板機或單片機控制，這種控制器實際上就是一臺電腦，所以只要泡沫雕刻機一開始工作，電腦馬上就可以進行其他排版工作，特別是較長時間雕刻時，該優勢特別明顯。

5, controllers are generally divided into two categories: one is only a driver, and all its computation is done by computer. When the foam carving machine is working, the computer is in wait state, and can not make typesetting. Another kind of controller is controlled by single board computer or single chip microcomputer. This controller is actually a computer, so as long as the foam carving machine starts working, the computer can do other typesetting work immediately, especially when carving for a long time, this advantage is particularly obvious.

6、絲桿和導軌也是泡沫雕刻機的重要組成部分，好的絲桿和導軌是泡沫雕刻機長期使用時其精度和性能的保證。

6, screw and rails are also important parts of the foam carving machine. Good screw and guide rail are the guarantee of precision and performance when the foam carving machine is used for a long time.