小型數控石材雕刻機斷刀的原因

來源：http://dzxiaoche.com 時間：2022-04-14 

小型數控石材雕刻機不再局限于工作室或加工車間，它已進入許多家庭，成為許多業余石雕愛好者的秘密武器。

Small CNC stone carving machine is no longer limited to studios or processing workshops. It has entered many families and become a secret weapon for many amateur stone carving enthusiasts.

正常情況下，我們在雕刻石頭時會遇到斷刀，但這種情況不一定是石材雕刻機的問題，建議了解不同斷刀情況的相應解決方案，斷刀的原因有幾個，主要是由以下問題引起的，可以盡量避免或采取相應措施解決。

Under normal circumstances, we will encounter knife breaking when carving stone, but this situation is not necessarily a problem of stone carving machine. It is suggested to understand the corresponding solutions to different knife breaking situations. There are several reasons for knife breaking, which are mainly caused by the following problems, which can be avoided or solved by taking corresponding measures as far as possible.

（1）刀具安裝問題。如果刀具安裝不正確，或夾頭內有雜物，導致刀具不垂直，刀具斷裂，因此，在安裝刀具時，需要仔細檢查刀具安裝是否正確。

(1) Tool installation problem. If the tool is not installed correctly or there are sundries in the collet, resulting in the tool is not vertical and the tool is broken, therefore, when installing the tool, it is necessary to carefully check whether the tool is installed correctly.

（2）為加工材料選擇相應的刀具。這很容易理解，例如，木材和翡翠之間存在很大的硬度差距，木工刀不能用來雕刻翡翠，但許多材料的硬度不同，如水晶、綠松石、軟玉、硬玉等，因此應選擇合適材料的石材雕刻機刀具進行加工。

(2) Select the appropriate tool for the machining material. This is easy to understand. For example, there is a large hardness gap between wood and jadeite. Woodworking knives cannot be used to carve jadeite, but the hardness of many materials is different, such as crystal, turquoise, nephrite, jadeite, etc. Therefore, stone carving machine knives with appropriate materials should be selected for processing.

（3）加工速度太快。我們說每種材料的硬度不同，刀具的承載能力一定是有限，如果加工速度設置過快，也可能導致斷刀，因此，應根據實際情況調整加工速度，避免過快。

(3) Processing speed is too fast. We say that the hardness of each material is different, and the bearing capacity of the tool must be limited. If the processing speed is set too fast, it may also lead to tool breakage. Therefore, the processing speed should be adjusted according to the actual situation to avoid too fast.

（4）石材雕刻機的刀路間距過大或下刀速度過快。與加工速度相同，加工刀路間距過大或下刀速度過快也可能超出刀具的承載范圍，導致斷刀。

(4) The knife path spacing of stone carving machine is too large or the cutting speed is too fast. The same as the machining speed, too large distance between machining paths or too fast cutting speed may also exceed the bearing range of the tool, resulting in tool breakage.

（5）高度差太大。同一道路的高度差太大，如果超出刀具的承載范圍，也會導致斷刀。

(5) The height difference is too large. The height difference of the same road is too large. If it exceeds the bearing range of the tool, it will also lead to tool breakage.

無論是工作室還是家用的小型數控石材雕刻機，如果遇到斷刀，都需要先分析這些問題，然后找出解決方案。

Whether it is a small CNC stone carving machine in the studio or at home, if it encounters a broken knife, it is necessary to analyze these problems first, and then find a solution.

以上就是為大家介紹的有關保麗龍雕刻機的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://dzxiaoche.com/

The above is a detailed introduction to the poly dragon engraving machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://dzxiaoche.com/

• 上一篇：使用四工序開料機加工板式家具的好處
• 下一篇：為什么要定期檢查雕刻機刀具的磨損情況？

相關產品：
• 
  木工雕刻機
• 
  1325木工雕刻機獨...
• 
  1325木工雕刻機
• 
  1325木工鏤空花格...
• 
  1225型平雕圓雕一...

相關新聞：
• 
  激光雕刻機和機械雕刻...
• 
  三軸雕刻機無心外圓磨...
• 
  石材雕刻機斷刀的原...
• 
  數控開料機會受到什么...
• 
  泡沫雕刻機日常井蓋如...